Installation (local printing), 3installation (local printing) – Konica Minolta BIZHUB PRO 1050 User Manual
Page 29
3
Installation (Local printing)
3-1
bizhub PRO 1050
3
Installation (Local printing)
To use the print controller as a local printer, following preparations are re-
quired;
1
Prepare Parallel cable (centronics IEEE 1284) and connect the print
controller and your computer.
2
Prepare User Software CD and Install the printer driver for local printing
to your computer.
3
Print the test page.
This chapter describes how to install the printer driver for local printing to
Windows-compliant computers and how to print the test page.
Refer to "Installation (Network printing)" on Page 4-1 about network printing.
3.1
Installation of the Printer Driver in the computer
You need to confirm that the copier is connected to the computer or the net-
work. The installation procedures may be different depending on OS.
Note
The bizhub PRO1050/1050P CD-ROM or PS-502 CD-ROM is required
for the setup.