Konica Minolta BIZHUB PRO 1050 - Manual (Page 237)

9
KONICA MINOLTA PS Printer Driver setting (Windows)
9-25 bizhub PRO 1050
Binding - Hole-Punch
The output paper can be set to be punched with 2 holes, 3 holes or 4 holes.
The position will be changed according with the [Binding Position] setting.
The [Hole-Punch] cannot be set in the following cases:
x When the [Multi Folder] is not available in the [Option] tab.
Binding - Center Staple and Fold
Folds the paper into half and staple at the center of the output paper on the
folded line.
The [Center Staple and Fold] cannot be set in the following cases:
x When the [Saddle-Stitcher] is not available in the [Option] tab.
Binding - Trim
Cuts the edges of the output paper which is center-folded or saddle stitched.
The [Trim] cannot be set in the following cases:
x When the [Saddle-Stitcher] is not available in the [Option] tab.
2 Holes / Left Binding
(Portrait)
2 Holes / Left Binding
(Landscape)
2 Holes / Right Binding
(Landscape)
2 Holes / Right Binding
(Portrait)
ABCD ABCD
2 Holes / Top Binding
(Portrait)
2 Holes / Top Binding
(Landscape)
ABCD
ABCDEF ABCDEF
ABCDEF