Konica Minolta BIZHUB PRO 1050 User Manual

Page 318

PS3 Printer Driver setting (Mac OS X)

11-20

bizhub PRO 1050

Back Cover Page

Sets a back cover for which paper is different than the text paper.

The [Back Cover Page] cannot be set in the following cases:

When the [Transparency] is selected in the [Print] - [Setup] - [Media Type]

When the [Collated] is not available in the [Print] - [Copies & Pages]

When the [Pages per Sheets] is selected in the [Print] - [Layout]

Back Cover Tray

Specifies the paper tray for the back cover.

PI Front Cover

Sets a front cover for which paper is from the [PI Tray 1] or [PI Tray 2].

PI Back Cover

Sets a back cover for which paper is from the [PI Tray 1] or [PI Tray 2].

The [PI Front Cover] or [PI Back Cover] cannot be set in the following cases:

When the [None] is selected for [Multi Folder] in the [Printer Info] window.

When the [Transparency] is selected in [Print] - [Setup] - [Media Type].

Transparency Interleave

Sets this when you want to use [Transparency Interleave] as paper. Select
either [Blank Sheet] or [Printed].

The [Transparency Interleave] cannot be set in the following cases:

When [Transparency] is not set in [Media Type] of the [Setup] window.

Paper Tray (Transparency Interleave)

Sets this when you want to use the paper feed tray for [Transparency Inter-
leave].

[Paper Tray (Transparency Interleave)] cannot be set in the following cases:

[Transparency] is not set in [Media Type] of the [Setup] window.

[Transparency Interleave] is not set in the [Setup] window.

ABCD

Back Cover - Off

Back Cover

- Blank

Back Cover

- Printed