Konica Minolta BIZHUB PRO 1050 - Manual (Page 373)

14
Utility Tool
14-27 bizhub PRO 1050
Settings on Windows XP
Complete the steps shown below to add the printer on your computer run-
ning under Windows XP. TCP/IP settings must have already been set up on
your computer. You need the accompanying CD-ROM which includes the
printer driver.
1
Click [Start] of the task bar. Then, select [Printers and Faxes] of the
Start menu.
2
Double-click [Add a printer] to run the [Add Printer Wizard].
3
Click [Next].
4
Choose [Network printer] and click
[Next].
5
Choose [Connect to a printer on the Internet or your intranet].
6
Enter the copier's URL in the [URL] field like this:
http:// printer's IP address :631/ipp
- In the "printer's IP address" column, enter the IP address assigned
to your Network Interface Card. Alternatively, you can enter the
host name of the printer's (NIC's) host name if DNS is set up on your
network.
- If you designate the proxy setting in your Internet Explorer, you may
access the your printer over IPP. For more information contact your
network administrator.
7
Click [Next].
The [Add Printer Wizard] will appear.
8
The wizard will take you through the process of installing the printer
driver of the [Add Printer Wizard].
DETAILS
Refer to "Installing to Windows XP (PCL6/PS3)" on Page 4-18.