Konica Minolta BIZHUB PRO 1050 - Manual (Page 370)

14
Utility Tool
14-24 bizhub PRO 1050
- To perform the setup manually, click [Manual setup].
6
Confirm the details of the setup on the setup screen. If it is OK, close
the setup screen by clicking the close box on the upper right of the win-
dow.
7
Click [OK] to close properties window of printer driver.
Note
The bizhub PRO 1050 is not corresponding to the IPX/SPX-P2P.
Device Name (DNS Name) Specify a printer name on the network.
IP Address Specify an IP address of the printer.
Hardware Address Specify a MAC address of the printer.
Port Number Specify a port number of the port you create.
Print Server Name Specify a print server name of the printer on the
IPX/SPX network.
Network Address Specify a network address of the printer on the
IPX/SPX network.
Add Port Create a port with the specified details.