Konica Minolta BIZHUB PRO 1050 User Manual
Page 162
7
PCL Printer Driver Setting (Windows)
7-33
bizhub PRO 1050
Per Page Setting - Add
Add Per Page Setting.
When click this button, the [Per Page Setting] dialog appears.
x
Page Number: Enters the page number (1 to 9999) which you want to
set in the Per Page Settings. Multiple page numbers can
be entered. When entering multiple page numbers, use
commas to separate them as in this example: [2,4,6]. A
range can be specified with a hyphen as in this example:
[6-10].
x
Print Type:
As a print type of the Per Page Settings, specify either
[Insert Blank Sheet], [Print (Single-Sided)] or [Print (Dou-
ble-Sided)].
x
Paper Source: Specifies the paper feed tray to be used in the Per Page
Settings. Selecting [Same as Body] sets the same one as
that set in [Paper source] of the [Setup] tab.
x
Staple:
A setting is made to decide if the Per Page Settings are
stapled or not. When [Same as Body] is selected, the
setting is the same one as that set in [Staple] of the [Set-
up] tab.
The [Staple] cannot be set in the following cases:
x
When [Binding] - [Staple] of the [Setup] tab is set.
x
Finish Stapling: Specifies the last page to be stapled.
x
Hole-Punch:
Configures the punch to be set as the Per Page Settings.
x
Use Tab Paper: Checks this when using the Tab paper. This can not be
set when [Same as Body] is selected in the [Paper
Source] of the [Per Page Setting] dialog.
x
Text on Tab:
Enters the text to be printed on the Tab paper.
x
Details:
When this button is clicked, the [Tab Text Details] dialog
appears. You can configure the orientation, position,
font name, font type, and font size for the tab text.
x
Tab position:
Selects the tab position.