Configuring the lpr settings, Configuring the lpr settings -18 – Konica Minolta BIZHUB 223 User Manual
Page 83
bizhub 423/363/283/223
6-18
6.2
Mac OS 9.2
6
4
Click the applicable PPD file, and then click [Select] (or [Open]).
When the selected printer is registered in the [Chooser], the setting procedure is completed.
% If the window showing the installable options appears, proceed to change the option settings as
necessary. Go to Step 5.
% If the [Chooser] window appears, go to Step 7.
5
In the [Options Installed 1] and [Options Installed 2] windows, specify the options installed in this ma-
chine.
6
Click [OK].
The [Chooser] window appears again.
7
Close the [Chooser] window.
Configuring the LPR settings
[TCP/IP Settings] for the machine
Specify the IP address for the machine.
[LPD Setting] for the printer
Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.
d
Reference
For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].
For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [Control Panels] - [TCP/IP].
2
From [Connect via:], select [Ethernet].
3
Select the [Configure:] item and configure the settings including the IP address and subnet mask ac-
cording to the settings for the network to which the Macintosh computer is connected.
4
Click the close button at the top left corner of the window.
% When the [Save changes to the current configuration? ] message appears, click [Save].