4 [finish] tab, Finish] tab -15 – Konica Minolta BIZHUB 223 User Manual
Page 106
bizhub 423/363/283/223
9-15
9.4
Parameter details
9
Reference
-
The options "2 e 2, 3 e 3 and 4 e 4" for [Combination], which are for printing a sheet of original onto
multiple sheets of paper, are available only for the PCL driver.
-
The [Skip Blank Pages] function is available for the PCL/XPS drivers.
-
The positions of binding margins vary according to the [Binding Position] setting.
9.4.4
[Finish] tab
[Binding Margin
Settings...]
[Shift Mode]
Select how to process the image to prepare the page
margin.
[Front Side]/[Back Side]
Specify the binding margin values. For 2-sided printing,
clearing the [Same value for front and back sides]
check box allows you to specify different values for the
front and back sides.
[Unit]
Select a unit to be used for specifying the size.
[Image Shift]
ON/OFF
Select this check box to print by shifting the entire print
image. Click [Image Shift Settings...] to specify the im-
age shift values.
[Image Shift Set-
tings...]
[Unit]
Select a unit to be used for specifying the size.
[Front Side]/[Back Side]
Specify the shift direction and values. For 2-sided print-
ing, clearing the [Same value for Front and Back sides]
check box allows you to specify different values for the
front and back sides.
Function Name
Option
Description
Function Name
Option
Description
[Staple]
ON/OFF, Left Cor-
ner/Right Corner/2 Posi-
tion (Left)/2 Position
(Right)/2 Position (Top)
Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.
[Center Staple
and Fold]
ON/OFF
Select this check box to specify center staple and fold.
[Punch]
ON/OFF, 2-Hole (Left)/2-
Hole (Right)/2-Hole
(Top)/3-Hole (Left)/3-
Hole (Right)/3-Hole
(Top)/4-Hole (Left)/4-
Hole (Right)/4-Hole (Top)
Select this check box to specify hole punching.
From the drop-down list, specify the number of punch-
es and the punching position.
[Fold]
ON/OFF, [Half-Fold]
Select this check box to specify folding.
From the drop-down list, specify the folding condition.