Konica Minolta BIZHUB 223 User Manual
Page 109
bizhub 423/363/283/223
9-18
9.4
Parameter details
9
Reference
-
[Print Device Image] of the [Overlay] function is available only for the PCL driver.
-
[Print Device Image] of the [Overlay] function is available only when a Hard Disk is installed.
-
The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine.
To use [Acquire Device Information] , in [Administrator Settings] of the machine, set [System Connec-
tion] - [OpenAPI Settings] - [Authentication] to [OFF]. For details, refer to page 13-52.
-
[Copy Guard] and [Password Copy] are available when [Password Copy] and [Copy Guard] are set to
[Yes] in [Administrator Settings]
−[Security Settings]−[Security Details] under this machine while the op-
tional Security Kit SC-507 is installed.. For details, refer to the [User's Guide Copy Operations].
[Overlay]
[None]
The overlay function is not used.
[Create Host Image]
Printing the original with this setting creates the overlay
data. Created data is saved in the computer.
[Print Host Image]
Select this option to print the original on top of the over-
lay data created with [Create Host Image].
Selecting this setting displays the overlay data stored in
the computer in the list below, allowing you to select it.
Clicking [Edit...] allows you to specify the overlay print-
ing conditions.
[Print Device Image]
Select this option to print the original on top of an over-
lay data of the machine.
Clicking [Edit...] allows you to specify the overlay data
and conditions registered in this machine.
[Edit...]
−
For details, refer to page 9-20.
[Copy Security]
ON/OFF, [Copy Pro-
tect]/[Repeatable
Stamp]/[Copy
Guard]/[Password Copy]
Specify the special pattern or password to prevent
copying. Click [Edit...] to specify items to be printed,
positions, composition method and password.
If you select [Password Copy], the [Edit...] screen ap-
pears where you can specify a password.
[Edit...]
−
For details, refer to page 9-22.
[Date/Time]
ON/OFF
Select this check box to print the date and time. Click
[Edit...] to specify items and pages to be printed and
positions.
[Page Number]
ON/OFF
Select this check box to print page number. Click [Ed-
it...] to specify items and pages to be printed and posi-
tions.
[Edit...]
−
For details, refer to page 9-23.
[Header/Footer]
Machine Setting 1 to Ma-
chine Setting 20
Select this check box to print the header and footer.
Select the header/footer from the list specified in the
main unit. Clicking [Edit...] allows you to specify items
and pages to be printed.
[Edit...]
[Acquire Device Informa-
tion]
Select this option to communicate with the machine to
read the header settings configured on the machine.
[Distribution Control
Number]
When printing multiple copies, this function prints the
number of copies in the header/footer.
[Edit...]
Specify the distribution control number conditions.
[Pages]
Specify the pages to be printed.
Function Name
Option
Description