Konica Minolta BIZHUB 223 - Manual (Page 266)

bizhub 423/363/283/223 14-27
14.5 Administrator mode overview 14
14.5.10 Setting for each purpose
Configure the settings according to the instructions shown in the window for items requiring multiple settings.
The available setting items are as follows.
- Configure the settings for sending a scanned document
- Configure the network print settings
- Restrict users using this machine
Reference
- As the setting procedure proceeds, its progress flow is displayed on the left.
- If setting is cancelled, you will return to the Setting for each purpose screen after the items that were
configured before cancellation have been applied.
[Line Parameter
Setting] Specify the fax line such as Dialing Method.
[TX/RX Settings] Configure the paper, User Box, and other settings for sending or receiving data.
[Function Setting] Configure the fax settings for Memory RX or Network Fax.
[PBX Connection
Setting] Specify the outside line at PBX connection.
[Report Settings] Configure the setting for a report, for example, Activity Report, to be output when
sending or receiving data.
[Multi Line Set-
tings] Specify the parameters and functions of the extended line.
•
This item is displayed when a line is extended.
[Network Fax Set-
ting] Configure the setting to use network fax.
•
This item is displayed only when a Hard Disk is installed.
[Header Informa-
tion] Registers sender information and fax number when sending data.
[Fax Print Quality
Settings] Specify whether to correct a received G3 fax according to the resolution.
•
The low resolution refers to 200 dpi e 100 dpi, 200 dpi e 200 dpi, or 300 dpi e
300 dpi, and the high resolution refers to 400 dpi e 400 dpi.
Item Description