Konica Minolta BIZHUB 223 - Manual (Page 236)

bizhub 423/363/283/223 13-52
13.4 Administrator Settings 13
13.4.16 Configuring Authentication under OpenAPI Settings
When user authentication is performed or when acquiring the device information with the PageScope Au-
thentication Manager, set the Authentication setting of the OpenAPI Setting screen of the machine to [OFF].
(Default: [OFF])
1
In the Administrator Settings screen, press [System Connection].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the System Connection screen, press [OpenAPI Settings].
3
In the OpenAPI Settings screen, press [Authentication].
4
Set [Authentication] to [OFF].
5
Press [OK].
The authentication settings are configured.
13.4.17 Configuring the cellular phone or PDA settings
You can specify whether to allow printing from a cellular phone or PDA and saving in a User Box. (Default:
[Restrict])
- [Allow]: Allow printing from a cellular phone or PDA, and saving in a User Box.
- [Restrict]: Not allow printing from a cellular phone or PDA, or saving in a User Box.
Reference
- [Cellular Phone/PDA Setting] is displayed when the optional Local Interface Kit EK-605 is installed
while [Bluetooth Setting] is enabled in this machine. For details, refer to the [User's Guide Network Ad-
ministrator]. To enable a Bluetooth communication, contact your service representative in advance.
1
In the Administrator Settings screen, press [System Connection].
% For details on displaying the Administrator Settings screen, refer to page 13-35.