beautypg.com

Configuring the lpr settings, Configuring the lpr settings -14 – Konica Minolta BIZHUB 223 User Manual

Page 79

background image

bizhub 423/363/283/223

6-14

6.1

Mac OS X 10.2/10.3/10.4/10.5/10.6

6

Configuring the LPR settings

[TCP/IP Settings] for the machine

Specify the IP address for the machine.

[LPD Setting] for the printer

Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.

d

Reference

For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].

For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].


Configuring the TCP/IP settings for the computer

Configure the TCP/IP settings for the Macintosh computer connected to the printer.

1

In the [Apple Menu], select [System Preferences...].

2

Click the [Network] icon.

3

From [Show], select [Built-in Ethernet].

4

Click the [TCP/IP] tab.

5

Select the [Configure:] item and configure the settings including the IP address and subnet mask ac-
cording to the settings for the network to which the Macintosh computer is connected.

6

Click the close button at the top left corner of the window.

% When the [This service has unsaved changes or Apply configuration changes ] message appears,

click [Apply].


Adding a printer

1

Select [Macintosh HD] - [Applications] - [Utilities] where the driver has been installed, and then double-
click [Printer Setup Utility] or [Print Center] to open it.

2

When the [You have no printers available. ] window appears, click [Add]. When the printer list appears,
click [Add].

% If available printers have already been specified, the [You have no printers available. ] window does

not appear.

3

Select [IP Printing] for the connection method.

4

For OS X 10.3, select [LPD/LPR] for [Printer Type:].

5

In [Printer Address:], enter the IP address for the machine.

This manual is related to the following products: