4 spool print jobs in hdd before rip, Spool print jobs in hdd before rip -7 – Konica Minolta BIZHUB 223 User Manual
Page 191
bizhub 423/363/283/223
13-7
13.2
User settings
13
13.2.4
Spool Print Jobs in HDD before RIP
Specify the spool function. (Default: [ON])
-
[ON]: When the next job is received while processing a job, the print data is stored in HDD.
-
[OFF]: The print data is not stored in HDD.
Reference
-
Normally, do not change this setting to [OFF]. Otherwise, normal printing may be interfered.
-
[ON] is available only when a Hard Disk is installed.
1
In the User Settings screen, press [Printer Settings].
% For details on displaying the User Settings screen, refer to page 13-2.
2
Press [Basic Settings].
3
Press [Spool Print Jobs in HDD before RIP].
4
Press the desired button.
This manual is related to the following products: