Konica Minolta BIZHUB 223 - Manual (Page 112)

bizhub 423/363/283/223 9-21
9.4 Parameter details 9
When [Print Device Image] is selected:
You can specify the overlay printing conditions by specifying the overlay registered in the machine.
Reference
- [Print Device Image] of the [Overlay] function is available only for the PCL driver.
- [Print Device Image] of the [Overlay] function is available only when a Hard Disk is installed.
- The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine. To use [Acquire Device Information], in [Administrator Settings] of
this machine, set [System Connection] - [OpenAPI Settings] - [Authentication] to [OFF]. For details, refer
to page 13-52.
Function Name Description
[Obtain Device Information] Select this option to communicate with the machine to read the overlay
settings configured on the machine.
[Overlay Info] Displays the information of the selected overlay.
[Print on Front Side]/[Print
on Back Side] Select the check box to specify whether printing is done or not for each of
the front side/back side.
[Overlay Name] Select the overlay name registered in the machine.
[Browse...] Click this button to display the detailed information of the selected over-
lay.
[Density] Select the overlay printing density.
[Overwrite] Specify the sequence for printing the overlay on top of the original.
[Same as Front Side] Clear this check box to specify the same value for both the front and back
sides.
[Pages] Specify the pages to be printed.