Konica Minolta BIZHUB 223 - Manual (Page 153)

bizhub 423/363/283/223 12-4
12.1 Proof Print 12
2
While [Current Jobs] is displayed, press [Release Held Job].
The [Release Held Job] screen appears.
3
From the job list, select the job you want to print.
% To print the remaining number of copies, continue with Step 6.
% To change the printing conditions, continue with Step 4.
% If the job you want to release is not displayed, press [ ] or [ ] until the desired job is displayed.
If an incorrect job was selected, touch the button for the selected job again to deselect it.
4
Press [Change Setting].
The [Change Setting] screen appears.
% To check the results of setting changes, select the job whose sample copy is to be printed from the
job list, and then press the Proof Copy key on the control panel.
One copy is printed for checking. After performing the
Proof Copy key, the original settings are restored. Configure the settings again as necessary.
5
Change the printing conditions in the [Change Setting] screen, and then press [OK].
The [Release Held Job] screen appears again.
% To cancel releasing the held job, press [Cancel].
6
Press [OK] or the Start key in the control panel.
The stored job is changed to an active job, and then printed.