12 i/f timeout setting, I/f timeout setting -48 – Konica Minolta BIZHUB 223 User Manual
Page 232
bizhub 423/363/283/223
13-48
13.4
Administrator Settings
13
13.4.12
I/F timeout setting
Specify the time until a communication timeout occurs for each of the USB or network interface. (Default: 60
sec.)
1
In the Administrator Settings screen, press [Printer Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the Printer Settings screen, press the interface to specify.
3
Press the C key to clear the value, and then use the keypad to enter the time. (10 to 1,000 sec.)
% If a value outside of the allowable range is specified, the message "Input error" appears. Enter a
number within the allowable range.
The time until a communication timeout occurs is set.
This manual is related to the following products: