Konica Minolta BIZHUB 223 - Manual (Page 239)

bizhub 423/363/283/223 13-55
13.4 Administrator Settings 13
13.4.20 Driver Password Encryption Setting
For the common encryption key to be added to print jobs, specify whether to use the factory default setting
or to change to a user-defined encryption passphrase. (Default: [Use Factory Default])
- [User-Defined]: Specify an encryption passphrase. Enter an encryption passphrase of 20 characters.
- [Use Factory Default]: Select this option to use the encryption passphrase (common key) that is not exposed> preset at shipping.
Reference
- An encryption passphrase must be specified using 20 characters.
- User, account, and secure document passwords are encrypted by the common encryption key.
- When [User-Defined] is selected for the encryption passphrase, select the check box for the encryption
passphrase in the printer driver to enable it, and then enter the same value.
If different values are used for the encryption passphrase for the machine and the printer driver, the ma-
chine cannot decrypt the encrypted user password, account password or secure document password,
and printing cannot be performed. For details, refer to page 12-32.
- When OpenAPI is used and SSL is enabled, it is possible for the machine to obtain the common en-
cryption key provided that the device information of the printer driver can be obtained automatically.
1
In the Administrator Settings screen, press [Security Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the Security Settings screen, press [Driver Password Encryption Setting].
3
Press the desired button.
d
Reference
For details on selecting [User-Defined] for the encryption passphrase, refer to page 12-32.