Konica Minolta BIZHUB 223 - Manual (Page 238)

bizhub 423/363/283/223 13-54
13.4 Administrator Settings 13
13.4.19 Secure Print Only
Specify whether the printing from the computer should be limited only to the security document. (Default:
[No])
Whenever printing is done from the printer driver, the data must be transmitted using the secure printing. Be-
cause this setting requires ID/password for every print job, your job is protected from intercepting by a third
party.
- [Yes]: Select this option to limit the printing only to the secure documents.
- [No]: Select this option not to limit the printing to the secure documents.
Reference
- When you print a document on the machine with [Secure Print Only] set to [Yes], specify [Secure Print
Only] on the printer driver so that only the [Secure Print] jobs are transmitted.
- If a normal print job is sent to the machine where [Secure Print Only] is set to [Yes], the print job is de-
leted.
- The Secure Print function is available only when a Hard Disk is installed. If a Hard Disk is not installed,
select [No].
d
Reference
For details on secure printing, refer to page 12-5.
1
In the Administrator Settings screen, press [Security Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the Security Settings screen, press [Security Details].
3
Switch the page by pressing [ ] or [ ], and then press [Secure Print Only].
4
Press the desired button.
Whether the printing should be limited to security documents is specified.