Konica Minolta BIZHUB 223 - Manual (Page 46)

bizhub 423/363/283/223 5-10
5.1 Windows Vista/Server 2008/7 5
5.1.3 For network connection (Web service print)
In Windows Vista/Server 2008/7, printers supporting the Web service print function on the network can be
located and installed.
d
Reference
To install a different printer driver in the computer where one has already been installed, you must uninstall
the whole package of the currently installed printer driver. For details, refer to page 8-3.
Settings for the machine
To use the Web service print, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings for the machine, refer to the [User's Guide Network Administrator].
Making the printer driver known from the Network window
To use Web service print in Windows Vista/Server 2008/7, install the printer driver before making it known to
the computer with plug and play.
0 Installing the driver to Windows Vista/Server 2008/7-based computers requires the administrator au-
thority.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to page 4-3 or page 5-2.
2
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for, be sure to connect the machine to the network.
3
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Cent-
er] on the computer.
4
Open the [Network] window.
% In Windows Vista/Server 2008, click [Start], and [Network].
% In Windows 7/Server 2008 R2, open [Computer] and click [Network].
If [Network] is not displayed in [Computer], click the [Network and Internet] category on the [Control
Panel], and also click [View network computers and devices].
Connected computers and devices are detected.
5
Select the device name of the machine, and then click [Install] on the toolbar.
% To check the device name, select [Network Settings] - [Web Service Settings] - [Printer Settings] in
[Administrator Settings] of this machine. In the default setting, the last six characters of [Printer
name] correspond to the low-order three bytes of the MAC address.
To check the MAC address, select [Configuration Page]. For details on how to output [Configuration
Page], refer to page 13-27.
The printer driver for this machine is detected and the machine is ready to print.
Items to be configured Description
IP address In [TCP/IP Settings] of the machine, specify the IP address.
Web Service Settings In [Web Service Settings] for the machine, enable the print function.