beautypg.com

Konica Minolta BIZHUB 223 User Manual

Page 149

background image

bizhub 423/363/283/223

11-8

11.3

Parameter details

11

Reference

-

The [Staple:] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.

-

The [Punch:] function is available only when the Punch Kit is installed on the optional Finisher FS-527.

-

The [Fold:] function is available only when the Saddle Stitcher is installed on the optional Finisher FS-
527
.

-

If multiple pages are printed while [Half-Fold] is specified for the [Fold:] function, the finishing unit varies
depending on the setting of [Half-Fold Specification] in [Copier Settings] of [User Settings] on the con-
trol panel. If [Half-Fold Specification] is set to [One Sheet at a Time], paper is folded by sheet.

If it is set to [Multiple Sheets], all sheets are folded collectively for each job even if the original consists
of multiple pages.

However, if the number of original pages is greater than the number of sheets this machine can fold,
the setting of the [Fold:] function is disabled automatically, and sheets are not folded for printing.

If [Half-Fold] is selected along with [Booklet], all sheets are half-folded collectively even if [One Sheet at
a Time] is specified. For details, refer to page 13-34.

This manual is related to the following products: