beautypg.com

5 [cover mode] tab, Cover mode] tab -16 – Konica Minolta BIZHUB 223 User Manual

Page 107

background image

bizhub 423/363/283/223

9-16

9.4

Parameter details

9

Reference

-

The [Staple] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.

-

The [Punch] function is available only when the Punch Kit is installed on the optional Finisher FS-527.

-

The [Center Staple and Fold] and [Fold] functions are available only when the Saddle Stitcher is in-
stalled on the optional Finisher FS-527.

-

If multiple pages are printed while [Half-Fold] is specified for the [Fold] function, the finishing unit varies
depending on the setting of [Half-Fold Specification] in [Copier Settings] of [User Settings] on the con-
trol panel. If [Half-Fold Specification] is set to [One Sheet at a Time], paper is folded by sheet.

If it is set to [Multiple Sheets], all sheets are folded collectively for each job even if the original consists
of multiple pages.

However, if the number of original pages is greater than the number of sheets this machine can fold,
the setting of the [Fold] function is disabled automatically, and sheets are not folded for printing.

If [Half-Fold] is selected along with [Booklet], all sheets are half-folded collectively even if [One Sheet at
a Time] is specified. For details, refer to page 13-34.

9.4.5

[Cover Mode] tab

[Output Tray]

Default, Tray 1 and Tray
3

Specify the tray to output the printed pages.
Selectable items vary depending on the option installa-
tion status.

[Paper Arrange-
ment]

[Prioritize Arranging Pa-
pers]/[Prioritize Produc-
tivity]

Specify the method for paper arrangement (adjusting
the binding position) for 2-sided printing. When [Priori-
tize Arranging Papers] is selected, the paper arrange-
ment process is performed after receiving all data.
When [Prioritize Productivity] is selected, the paper ar-
rangement process is performed while receiving and
printing data.

Function Name

Option

Description

Function Name

Option

Description

[Front Cover]

ON/OFF, [Blank]/[Print]

Select this check box to attach a front cover page.
It can be specified when any other option than [Auto] is
selected for Paper Tray.

[Front Cover Tray]

Tray 1 to Tray 4, LCT, By-
pass Tray

Select the paper tray for the front cover sheet.
Selectable items vary depending on the option installa-
tion status.

[Back Cover]

ON/OFF, [Blank]/[Print]

Select this check box to attach a back cover page.
It can be specified when any other option than [Auto] is
selected for Paper Tray.

[Back Cover Tray]

Tray 1 to Tray 4, LCT, By-
pass Tray

Select the paper tray for the back cover sheet.
Selectable items vary depending on the option installa-
tion status.

This manual is related to the following products: