Pulsafeeder Pulsar DLC - Manual (Page 104)

99
14. Orient the DLC properly at a comfortable height above the pump and align the slot in the DLC
coupling with the 'flats' on the adjustment shaft by turning the Manual Control knob on the DLC.
Do not turn the PULSAR gear box adjustment shaft!
15. Lower the DLC onto the gear box.
Figure 29 – Positioning the DLC
It may be necessary to tip the DLC slightly towards the motor to clear the Motor adapter.
a) With the DLC approximately 25mm (1 inch) above the gear box, make a fine adjustment to align
the slot in the DLC coupling with the adjustment shaft 'flats'.
b) Once aligned, lower the DLC to mate with the gear box.
Do not force the cover! When the coupling is properly aligned, the DLC will seat itself under its own
weight.