Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 64)

- 64 -
Input mode
DV device input mode
Registering a folder
The [MaterialFolder] is pre-registered in the library screen.
(When the MotionDV STUDIO is installed, a folder named
[MotionDV STUDIO] is created on the personal computer
and registered with the indication name [MaterialFolder].)
Video, audio, editing information, etc. will be saved in it as
default, but you can register another folder to save the
data in.
1. Click .
The new folder creation screen is displayed.
• You can also display the new folder creation screen
from [Library] >> [New folder] in the menu.
2. Determine the folder to be registered and its
name.
A You can select a folder to be registered.
Click to select a folder to be registered and click
[OK].
The folder’s path (C:\, etc.) is displayed.
• The folder’s path (location) can also be directly
entered.
When you create a new folder, make sure to enter
the folder name to the end of the path name of the
folder. (Up to 100 alphanumeric
characters can be entered for folder name including
the path.)
B You can enter the display name for the folder in the
library.
• Up to 128 alphanumeric (single-byte) characters
can be entered for display name.
3. Click [OK].
The folder is registered.
Click
, and the registered folder will be displayed.
Note
` This function cannot be used if the hard disk containing
the folder in which the data is to be recorded has less
than about 300 MB of free space.
A
B