Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 221)

Listing of menus
- 221 -
Menus of MotionDV STUDIO
[Auto index]
Automatically detects scene transitions in the video
recorded on the tape and adds indexes. (Tape positions
where the recording is not continuous due to pausing are
detected as scene transitions.) (
@ 48 )
[Index]
Adds an index in any location of the video on the tape.
You can edit the video or search a scene start with the
index information. (
@ 46 )
[Mark-in]
Sets the start point to capture video. (
@ 42 )
[Mark-out]
Sets the end point to capture video. (
@ 42 )
[Delete index]
Deletes the selected indexes (
@ 46 ) from the input tape
track.
[Cancel Mark-in/Mark-out]
Interrupts the setting of the mark-in after clicking the
[Mark-in] button. (
@ 42 )
[Select all]
Selects all the video data on the input tape track.
[Select all marked segments]
Selects all the portions (the segment between the mark-in
and the mark-out position) that have been designated as a
capturing range. (
@ 50 )
[Batch capture]
Select to capture multiple selected video clips at a time.
(
@ 50 )
[Make representative icon]
Assigns the icon of selected video as the icon of the tape
information file when the tape information is stored.
After it is saved, the display will change. (
@ 60 )
[Properties]
Displays the information about selected video.
On the [Properties] screen, you can perform name setting,
scene start search, representative icon setting, and video
capturing.
[Jump]
Displays the Jump setting screen.
You can access to any video on the tape by inputting the
time code. (
@ 49 )
[Clear]
Deletes all tape information from the input tape track.