Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 116)

Edit mode
- 116 -
Non-linear edit mode
Printing tape labels
Labels for DV or VHS cassettes can be printed based on
the contents of the input tape track or the edit track.
Note
` You cannot use this function without connecting to the
printer. Refer to the operating instructions of the printer
for how to connect it.
` Set to the DV device input mode ( @ 33 ) or the Non-linear
edit mode ( @ 72 ) and verify that the information for which
a tape label is to be created is displayed in the input tape
track or the edit track.
` In the DV device input mode ( @ 33 ), double-click a file
displayed on [Tape library] in the library, and the tape
information stored will be displayed in the input tape
track.
` In the Non-linear edit mode ( @ 72 ), double-click a file
displayed on [Editing infor...] in the library, and the
editing information stored will be displayed in the edit
track.
` If the representative icon or the content of a track is
changed, the picture in the tape label will also be
changed.