Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 56)

- 56 -
Input mode
DV device input mode
Capturing still images in the card
When a video device supporting memory cards is
connected, you can capture still images from a
MultiMediaCard or SD Memory Card into a PC.
1. Insert a card into the video device and set it to
the Picture Playback Mode.
• If the MotionDV STUDIO has already been activated,
first exit from it.
• For details on how to insert a memory card, please
read carefully the Operating Instructions for the video
device and the card.
2. Connect the video device to the PC and
activate the MotionDV STUDIO.
• For the connection between the video device and the
personal computer, refer to the “operating instructions
for PC connection”.
• Images cannot be captured from a card in USB
connection. ( @ 11 )
3. Verify that the MotionDV STUDIO is in the DV
device input mode and click
.
The still images on the memory card are displayed in
the preview screen.
• Click
, and the images will be hidden. To display
them again, click .
• Image scrolling cannot be controlled from the
MotionDV STUDIO. Control it on the video device.
4. Click .
The image is captured as a video clip.
The duration of the video captured and how much
more video can be captured are displayed.