Allied Telesis AT-CV5000 - Manual (Page 59)

AT-CV5000 Media Converter Chassis Installation Guide
59
in Figure 33.
Figure 33. Inserting an SFP Transceiver into the SFP Slot
Note
For information about the proper cable type, refer to the SFP
transceiver installation instructions.
Note
Before you install the cable in the SFP transceiver, verify that the
optical power input to the transceiver is within its dynamic range.
2. Remove the dust cover from the SFP transceiver in the line card, as
shown in Figure 34.
Figure 34. Removing the Dust Cover from the SFP Transceiver
3. Connect the fiber optic cable to the SFP transceiver, as shown in
Figure 35.
Figure 35. Connecting Fiber Optic Cables to the SFP Transceiver
LK AT FD
S
F
P
T
X
534
LK A T FD
S
F
P
T
X
535
LK AT FD
S
F
P
T
X
579