Allied Telesis AT-CV5000 - Manual (Page 45)

AT-CV5000 Media Converter Chassis Installation Guide
45
Unpacking the Chassis
To unpack the chassis, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Make sure that the following components are included in the package.
If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
ˆ One AT-CV5000 chassis
ˆ Two rack-mounting brackets
ˆ Eight flathead Phillips rack-mounting bracket screws
ˆ Two power cord retaining clips
ˆ Two single ground lugs
ˆ One line card removal tool
ˆ Documentation CD
3. Place the AT-CV5000 chassis on a level, secure surface.