Allied Telesis SwitchBlade x8106 - Manual (Page 43)

SwitchBlade x8106 Chassis Switch Installation Guide
43
AT-SBx81XS6
Line Card
The AT-SBx81XS6 Line Card has one LED for each SFP+ slot. The LED
is shown in Figure 21 and described in Table 9.
Figure 21. SFP+ Slot LEDs on the AT-SBx81XS6 Line Card
Off This LED state can result from the following
conditions:
 The transceiver slot is empty.
 The transceiver has not established a link
with a network device.
 The LEDs on the Ethernet line cards are
turned off. To turn on the LEDs, use the
eco-friendly button.
Table 8. Port LEDs on the AT-SBx81GS24a SFP Line Card (Continued)
Table 9. SFP+ Slot LEDs on the AT-SBx81XS6 Line Card
LED State Description
L/A
Solid Green The transceiver has established a link with a
network device.
Flashing
Green The transceiver is transmitting or receiving data at
10 Gbps.
Off This LED state can result from the following
conditions:
 The transceiver slot is empty.
 The transceiver has not established a link
with a network device.
 The LEDs on the Ethernet line cards are
turned off. To turn on the LEDs, use the
eco-friendly button.