Samsung CLX-9250ND-XAA - Manual (Page 83)

SyncThru™ Web Service_ 83
you want to use as an alternative.
TCP/IPv6
You can set IPv6 settings. Set the values and click the Apply button on
the upper right corner of the page. This feature is also available from the
machine (see "TCP/IPv6" on page 54).
From the SyncThru™ Web Service, select the Settings tab > Network
Settings > TCP/IPv6.
The Undo button clears all the values set so far.
• General: Set the general IPv6 settings.
- IPv6 Protocol: Check to enable IPv6 protocol.
Reboot the machine to apply the change.
- Manual Address: Check to enter Address/Prefix manually.
• The Assigned IPv6 Addresses: Shows the assigned IPv6
addresses.
• Dynamic Host Configuration Protocol version 6 (DHCPv6)
- DHCPv6 Configuration: Select the DHCPv6 Configuration
method.
- Use DHCP as directed by a router: DHCPv6 is enabled
when a router advertises to use DHCPv6.
- Always Enable DHCP: Regardless of router advertisement,
use DHCPv6 to acquire an IPv6 address.
- Never use DHCP: Disables DHCPv6.
• Domain Name System version 6 (DNSv6)
- Host Name: Shows the machine's host name.
- IPv6 Domain Name: Enter the domain name. You can enter up
to 128 characters.
- Primary DNSv6 Server Address: Enter the address of the
DNSv6 server you want to use primarily.
- Secondary DNSv6 Server Address: Enter the address of the
DNSv6 server you want to use as an alternative.
- Dynamic DNSv6 Registration: Check to enable or disable
dynamic DNSv6 registration.
Raw TCP/IP, LPR, IPP
You can set TCP/IP, LPR and IPP protocols for network printing. For
more information on each protocol place the mouse cursor over .
(see "Print settings (Ports to set for network printing)" on page 55). Set
the values and click the Apply button on the upper right corner of the
page. This feature is also available from the machine (see "Raw TCP/IP
Settings" on page 55, "LPR/LPD Settings" on page 55 or "IPP Settings"
on page 55).
From the SyncThru™ Web Service, select the Settings tab > Network
Settings > Raw TCP/IP, LPR, IPP.
The Undo button clears all the values set so far.
• Raw TCP/IP Printing
- Raw TCP/IP: Check to enable Raw TCP/IP.
- Port Number: Enter the port number of the machine for raw
TCP/IP Printing. You can change this port number whenever the
network environment you are using changes.
• LPR/LPD
- LPR/LPD: Check to enable LPR/LPD.
- Port Number: Enter the port number of the machine for LPD
Printing. You can change this port number whenever the network
environment you are using changes.
• Internet Printing Protocol (IPP)
- IPP: Check to enable IPP.
- Printer Name: Enter the printer name.
- Printer URI: Shows the printer URI.
Click on the Advanced button to enter more information.
Proxy Settings
You can set proxy settings and enable authentication to connect to
licence server through http proxy server. These proxy settings are
provided currently only if the administrator wants to update an XOA
application’s license online through proxy server.
This option will be available when an XOA application's license
needs to be updated.
• Proxy Settings
- Use Proxy: Check to enable proxy settings.
- HTTP Proxy Server Address: Enter the HTTP proxy server
address to use.
- HTTP Proxy Server Port Number: Enter the HTTP proxy
server port number to use.
• Proxy Authentication Settings
- Enable: Check to enable proxy server authentication.
- User ID: Enter the user ID for proxy server authentication.
- Password: Enter the password for proxy server authentication.
SLP
You can set SLP for searching the device on the network. You can also
set the settings from the machine. Set the values and click the Apply
button on the upper right corner of the page. This feature is also
available from the machine (see "SLP Settings" on page 56).
From the SyncThru™ Web Service, select the Settings tab > Network
Settings > SLP.
The Undo button clears all the values set so far.
• SLP Protocol: Check to enable SLP protocol.
• Port Number: Shows the port number.
• Scope 1~3: Enter the network scope to use, up to 3 scopes can be
set. Each machine must always be in one or more scopes. You need
scopes to group services that are comparable to the network
neighborhood in other systems.
• Message Type: Select the message type.
• Multicast Radius: Multicast radius for the multicast packets. This
value will be taken in to effect only if IPv6 is disabled.
This is a limitation with Java Runtime environment.
• Registration Lifetime: Enter the life time of service registration
when registering services with DA.
• Multicast Address: Shows the multicast address.
WSD
If you are using Windows Vista® or later as an operating system, you
can set WSD (Web Service for Device) for searching the device on the
network. You can also print from the searched device. Set the values
and click the Apply button on the upper right corner of the page.
From the SyncThru™ Web Service, select the Settings tab > Network
Settings > WSD.
The Undo button clears all the values set so far.
• WSD Protocol: Check to enable WSD protocol.