Samsung CLX-9250ND-XAA - Manual (Page 63)

Network setup_ 63
SyncThru™ Web Service
You can set to use SyncThru™ Web Service or not. If you set this option to
“off”, users cannot access SyncThru™ Web Service. Configure the settings
and press OK to save the settings.
Press Machine Setup > Network Settings > SWS from the display screen.
SMTP setting
You can set up the network environment for outgoing emails. If this setting
is not configured, you cannot use the scan-to-email feature. Outgoing
emails will be sent through the SMTP and POP3 servers you set here.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
the Settings tab > Network Settings. (see "Outgoing Mail Server
(SMTP)" on page 85).
1. Press Machine Setup > Network Settings > SMTP from the display
screen.
2. Select and set the appropriate option.
• Outgoing SMTP Server: You can set SMTP server settings.
- IP Address or Host Name: Select whether to use an IP
address(IPV4/IPV6) or a host name.
- SMTP Server: Enter the SMTP server address.
- SMTP Port: Enter the server port number from 1 to 65535. 25 is
set as a default value.
- SMTP Server Login Name: Enter the user name used for
authentication. You can enter up to 64 characters. If you do not
check SMTP Requires Authentication, this field will be grayed
out.
- SMTP Server Password: Enter the password for
authentication. You can enter up to 64 characters. If you do not
check SMTP Requires Authentication, this field will be grayed
out.
- Maximum Message Size: You can set the maximum message
size (1 MB-50 MB). If the scanned document is larger than this
message size, it will be split into multiple messages.
- Server Connection Timeout: You can set the time that system
will wait before the SMTP server connection fails due to time-out.
You can set the time value between 30-120 second(s). The time
value should be 30 seconds or more for reliable operation over
congested enterprise networks. 30 seconds is set as a default.
- SMTP requires authentication: Check if you want to set
authentication when sending outgoing emails.
• POP Before SMTP: You can set the POP server settings.
- POP3 Authentication before SMTP: You can set POP3
authentication to appear before SMTP client authentication
usage. If you enable this option, POP3 is required by the SMTP
server first. Check to enable this option.
- IP Address or Host Name: Select whether to use an IP
address (IPV4/IPV6) or a host name.
- POP3 Server: Enter the POP3 server address.
- POP3 Server Login Name: Enter the user name used for
POP3. You can enter up to 64 characters.
- POP3 Server Password: Enter the password for POP3. You
can enter up to 64 characters.
- POP3 SSL On: Check if you want to secure the email
connection with SSL/TLS.
- POP3 Port: Enter the server port number from 1 to 65535. 110
is set as a default value.
3. Press OK to save the changes or Back (Cancel) to return to the
previous screen.