Samsung CLX-9250ND-XAA User Manual
Page 80
SyncThru™ Web Service_ 80
Line number tab
You can set settings for each line.
•
Machine ID & Fax Number: Set the machine ID and fax number
which will be printed at the top of each page.
•
Sending
-Error Correction Mode: Check this option for the machine to
correct the error. It helps with poor line quality and ensures any
faxes you send are properly transmitted to any other
ECM-equipped fax machines. Sending a fax using ECM may
take more time.
-
Dial Type: Select the dial type. Some countries may not
support this option. Contact your local telephone company for
Dial Type setting information.
-
Toll Save: Check to send a fax in the toll save time for saving
money.
-
Start Time: Set the toll save start time. If the Toll Save
option is checked, the machine will start sending the fax when
it is the time you set here.
-
End Time: Set the toll save end time. If the Toll Save option
is checked, the machine will stop sending the fax when it is
the time you set here.
-
Redial Times: Select the redial time from the drop-down list.
Selecting 0 means that the machine will not redial.
-
Redial Term: Select the terms for redialing from the drop-down
list.
•
Receiving
-
Ring to Answer: Set the number of times the machine rings
before answering an incoming call.
-
Receive Mode: Select the receive mode. If you select
Answering Machine/Fax, you can receive a fax while the line is
being used by the answering machine.
-
Secure Receive: You can set the machine to keep the received
faxes in memory so that unauthorized people cannot access
them when you are absent. This option restricts printing of
received faxes when the machine is unattended.
-
Start Time: Set the secure receive start time. If the Secure
Receive option is on, the machine will start applying the
secure receive function when it is the time you set here.
-
End Time: Set the secure receive end time. If the Secure
Receive option is on, the machine will stop applying the
secure receive when it is the time you set here.
-
Print fax in secure receive mode: Select to print faxes in
the memory. A four-digit Passcode is used when you want to
print out received faxes in memory.
Received Fax Printing
You can set received fax printing related settings. For more information
about the options, refer to the setting this option from the machine (see
•
Received Fax Printing: Set the general fax settings.
-
Duplex: Select to print received fax data on both sides of paper.
-
Output Tray: Shows the tray set to be used for the output tray.
-
Auto Reduction: Set to automatically reduce an incoming page.
When receiving a fax containing pages as long as or longer than
the paper loaded in the paper tray, the machine can reduce the
size of the original to fit the size of the paper loaded in the
machine.
If you do not enable this option, the machine cannot reduce the
original to fit onto one page. The original will be divided and
printed in actual size on two or more pages.
-
Discard Size: Enter the reduce size for reduction. The the
machine minuses the specified segment set as the discard
size. If you have selected Auto Reduction, this option is
enabled.
-
Mark 1st Page: Check to mark the first page of the fax.
-
Receive Header: Check to automatically print the page number,
date and time of fax reception at the bottom of each page.
-
Color Printing (CLX-9252 9352 Series only): Check to print
received fax in color.
•
Paper Source: If the tray is set to On, you can use the tray for
printing the received fax. If the tray is set to Off, you cannot use the
tray for printing the received fax.
Junk Fax Setup
You can set the machine to not accept faxes sent from remote stations if
their numbers are stored in the memory as spam or junk fax numbers.
You can enter up to 10 junk fax numbers.
•
Junk Fax: Select to filter the junk faxes. You need to click Apply
and save the setting before adding a junk fax number.
Adding a junk fax number
1. From the SyncThru™ Web Service, select the Settings tab >
Machine Settings > Fax > Junk Fax Setup.
2. Click on the Add button.
A pop-up window appears.
3. Enter the junk fax number. You can also load the number stored for
the Caller ID feature by clicking the Caller ID button.
4. Click Apply.
Deleting a junk fax number
1. From the SyncThru™ Web Service, select the Settings tab >
Machine Settings > Fax > Junk Fax Setup.
2. Select the number you want to delete and click Delete.
A pop-up window appears.
3. A confirmation message appears, click OK.
The list is reloaded and the number you deleted is removed from the
list.
Mailbox Setup
You can set the options for managing the mailbox.
•
Document Policy: You can set when to delete the documents
stored in the Mailbox.
-
Delete On Poll: The fax data will be deleted after it has been
transmitted.
-
Delete On Print: The fax data will be deleted after it has been
printed.
•
Mailbox Configuration: You can create, edit, or delete a Mailbox.
Fax Forward
You can set the fax forward related settings to enable the user to
forward received or sent faxes to other destinations such as Fax, Email,
Server (SMB, FTP, and WebDev), and Box. Fax forwarding to several
destinations is also possible.
•
Settings button: Set the default information for the Fax Forward to
Email.
Adding a fax forwarding setting
1. From the SyncThru™ Web Service, select the Settings tab >
Machine Settings > Fax > Fax Forward.
2. Click on the Add button.