beautypg.com

Smb auth settings, Network filtering settings – Samsung CLX-9250ND-XAA User Manual

Page 59

background image

Network setup_ 59

append root to base DN.

Login Name: You can enter up to 64 characters.

Password: You can enter up to 64 characters.

Search Name Order: Select the order you want. When LDAP

address book search is performed it is required to map the user

entered text to an LDAP attribute. The result will be shown as

how you set this. If you set it to Common Name, the result will be

listed in alphabetical order according to the Common Name.

LDAP Configuration Test: Press to test the LDAP server.

2. Press OK to save the change or Back (Cancel) to return to the

previous screen.

Editing a LDAP server

1. From the list, select the LDAP server you want to edit and press

Edit.

2. A pop-up window appears.

Edit the necessary information

3. Press OK to save the change or Back (Cancel) to return to the

previous screen.

Deleting a LDAP server

1. From list select the LDAP server you want to delete and press

Delete.

2. A confirmation window appears. Press OK.
3. Press OK to save the change or Back (Cancel) to return to the

previous screen.

SMB Auth Settings

You can set SMB authentication. Configure the settings and press OK to

save the settings.
Press Machine Setup > Network Settings > SMB Auth Settings from the

display screen.

You can also use this feature from the SyncThru™ Web Service.

Open the Web browser from your networked computer and type the IP

address of your machine. When SyncThru™ Web Service opens, click

Security > Network Security > External Authentication Server >

SMB Server (see "SMB Server" on page 88).

Adding a SMB sever

1. Press Add to add a new SMB server.

Default Domain Name: Enter the domain name to be used for

log-in. You can enter up to 128 characters.

You can only use ASCII 32 - 35, 37 - 63, 65 - 123, or 125

character sets.

Default Server: Enter the default server from 1 to 65535.

Default Port No.: Enter the default port number from 1 to

65535. 139 is set as a default value.

Standard port number for SMB over NetBIOS is 139.

Standard port number SMB over TCPIP direct is 445.

Backup Server: Enter the backup server from 1 to 65535.

Backup Port No.: Enter the backup port number from 1 to

65535. 139 is set as a default value.

Default Server: Press to make it a default server.

2. Press OK to save the change or Back (Cancel) to return to the

previous screen.

Editing a SMB server

1. From list select the SMB server you want to edit and press Edit.
2. A pop-up window appears.

Edit the necessary information

3. Press OK to save the change or Back (Cancel) to return to the

previous screen.

Deleting a SMB server

1. From the list, select the SMB server you want to delete and press

Delete.

2. A confirmation window appears. Press OK.
3. Press OK to save the change or Back (Cancel) to return to the

previous screen.

Network filtering settings

You can set your machine to prevent unlisted IP or MAC addresses from

connecting to the machine.

Network Filtering Settings

You can set general network filtering settings. Configure the settings and

press OK to save the settings.
Press Machine Setup > Network Settings > Network Filtering Settings

from the display screen.

You can also use this feature from the SyncThru™ Web Service.

Open the Web browser from your networked computer and type the IP

address of your machine. When SyncThru™ Web Service opens, click

Security > Network Security > IP/MAC Filtering (see "IP/MAC

Filtering" on page 87).

This manual is related to the following products: