Upnp (ssdp) settings, Mdns settings, Upnp (ssdp) – Samsung CLX-9250ND-XAA User Manual
Page 57: Mdns
Network setup_ 57
traps from the system.
-
Authentication Failure Alerts: Check to enable this option. If
you enable this option, the Trap server can get notification for
authentication failure related traps from the system.
-
Cold Start Alerts: Check to enable this option. If this option is
enabled, the Trap server can get notification during hard bootup
(restarting the system by turning the switch off/on).
-
Warm Start Alerts: Check to enable this option. If this option is
enabled, the Trap server can get notification during warm bootup
(restarting the system without turning the switch off /on).
-
Community Name: Enter the community name.
•
Edit: Select the server you want to edit and press this button.
•
Delete: Select the server you want to delete and press this button.
SNMP Community
You can see the community status and its permissions. Configure the
settings and press OK to save the settings.
Press Machine Setup > Network Settings > SNMP Settings > SNMP
Community from the display screen.
•
Add: Press this button to add a new SNMP community.
-
Community Status: Check to enable community.
-
Community Name: Enter the community name.
-
Access Permission: Select the access permission.
•
Edit: Select the community you want to edit and press this button.
•
Delete: Select the community you want to delete and press this
button.
UPnP (SSDP) settings
You can set UPnP (SSDP) protocol. Configure the settings and press OK to
save the settings.
Press Machine Setup > Network Settings > UPnP Settings from the
display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Settings > Network Settings > UPNP (see "UPNP" on page 84).
•
SSDP: Select whether to enable or disable SSDP (Simple Service
Discovery Protocol).
•
SSDP TTL: Enter the packet time to live. 4 is set as a default value.
•
Port Number: Shows the port number.
•
Friendly Name: Shows the friendly name used by SSDP. Friendly
Name will be same as the Samsung model name (IP address) used by
the SSDP protocol and is shown in Windows network when it detects a
machine.
MDNS Settings
You can set mDNS (Multicast Domain Name System) settings. Configure
the settings and press OK to save the settings.
Press Machine Setup > Network Settings > MDNS Settings from the
display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Settings > Network Settings > mDNS (see "mDNS" on page 84).
•
MDNS Enable: Select whether to enable or disable mDNS.
•
Port Number: Shows the port number used by mDNS.
•
mDNS Name: Shows the instance name used by the services for
registering via mDNS.
•
Friendly Name: Shows the friendly name used by mDNS. Friendly
Name will be same as the link address used by the mDNS protocol and
is shown in the Windows network when it detects a machine.