Ag Leader GeoSteer Installation Manual - Manual (Page 55)

Hardware Installation Guide 45
9
Post-Installation Procedures and
Information
The Post-Installation Procedures and Information chapter provides information in the following sections:
• Overview
Overview
After the installation has been completed, there are a number of procedures that may need to be performed prior to operating
the GeoSteer system. These can include the following:
• Create New Vehicle
• Hydraulic Leak Test
• Pressure Relief Valve Adjustment Procedure
• Calibration and Tuning Guidelines
Refer to the Post-Installation Procedures and Information chapter in the vehicle-specific
AutoSteer Installation Manual provided with the installation kit for information on which
procedures need to be performed and how to perform them.