Ag Leader GeoSteer Installation Manual - Manual (Page 4)

Overview
ii GeoSteer System
Safety Information
Warning Alerts
The GeoSteer system installer and manufacturer disclaim any responsibility for damage or physical harm caused by the failure
to adhere to the following safety requirements:
• As the operator of the vehicle, you are responsible for its safe operation.
• The steering system is not designed to replace the vehicle’s operator.
Note: After the installation of the GeoSteer system, verify that all the screws, bolts, nuts, and cable connections are tight.
Verify that all the cables and hoses have been secured to prevent them from being damaged. If any of the hydraulic lines or
fittings were loosened during the installation, verify that they have been reattached and tightened to prevent oil leaks.
To understand the potential hazards associated with the
operation of a GeoSteer equipped vehicle, read the
provided documentation prior to installing or operating the
GeoSteer system on a vehicle.
To prevent accidental death or injury from being run over by
the vehicle, never leave the vehicle’s operator seat with the
GeoSteer system engaged.
To prevent accidental death or injury from being run over by
the vehicle verify that area around the vehicle is clear of
people and obstacles before startup, calibration, tuning, or
use of the GeoSteer system.