Ag Leader Integra Users Manual - Manual (Page 62)

46 Firmware Version 5.4
4. Return to Home screen
When you complete the steps in the Wizard, you will return to the Home screen.
• For information on Run screen operations, see “Run screens” on page 47 .
F
IELD
F
INDER
If you have an existing field boundary, and your current GPS position is within that field boundary, the
display will automatically pick the correct Grower, Farm and Field combination when you start a Field
Operation.
• Region button
A region is used to subdivide a field into smaller sections. The region in which data
is currently being logged is listed on the Region button. A new region can be created at any time as you
are performing a field operation.
To change between or add a new region to a field, press the Region button and follow the on-screen
instructions.
• Field Notes button
Edit any of the report items that are listed in Smart Report™. For more information, see
“Smart Report™” on page 68 .
F
IELD
O
PERATION
O
PTIONS
During a field operation, you can suspend or close the event by pressing on the wrench at the end of the
Grower Farm Field (Select Event) button. This opens the Events Options screen.
Press Setup
button (wrench)
on Event bar.
The Event Options screen allows operator to change
the Event name, Suspend or Close Event, be
Prompted to Close the Event, and to Clear Map
bounds.
A closed event cannot be re-opened and will not
show up in the Event Selection screen. A user can
manually close Events or be prompted to close
events.
Region:
<1>
Event: 2014-01-09_14:40:42
Grower: George Eilers
Farm: Sheldon Field: Orab
Event Options
Suspend
Event
Event Name
2020-01-10_08:3:31
Clear
Map Bounds
Close
Event Prompts to
Close Event