Ag Leader Integra Users Manual - Manual (Page 290)

274 Firmware Version 5.4
Note: In order to create an accurate Reference Strip, record for at least 300 seconds (5 minutes) in Corn and
North American Wheat and 150 seconds (2.5 minutes) in Europe.
5. File Name
Press the Stop button when you wish to
finish creating the Reference Strip. The
Reference Strip Information screen
appears, showing the new Reference Strip
file name. Press to accept, or press
to edit, if necessary.
6. OptRx Sensors Apply Variable Rate
The OptRx sensors apply variable rate N,
based on data received from the sensors.
This variable rate appears in the Product
Control Toolbox (A).
7. (OPTIONAL) View Reference Strip
If desired, you may review this reference strip by pressing
the View All button, located on the bottom right-hand side
of the Map screen’s Equipment Tab. The file name of the
new reference strip appears in the Reference Strip
Selection screen.
Note: To delete a reference strip, highlight the file name and press Delete.
C
ROP
S
ENSOR
S
ETTINGS
Note: All units represent pounds (kilograms) of nitrogen.
205 +
185 - 205
165 - 185
145 - 165
0 - 145
Rate
Flow:
Container:
12.0 gal/min
793 gal
OptRx
0.49 ac 5.0 mph
15.00
15.00
5.000
5.000
gal/ac 1
15
2
10
30% UAN
Target Rate
N (lb/ac)
50
Average VI
0.649
Reference Strip
View All Create
VI MAP
80 ft 0 in 100%
30% UAN
N lb/ac
Reference Strip Select Dialog
Delete
Create
Sensor Rx:
Strip Name:
VI Reference Value:
Field Name:
Crop Growth Stage:
Crop Variety:
Current File Name: 2010-04-20_1516.rfs
Current Strip Name: East Field
File Name
2010-04-19_1009.rfs
2010-04-20_1516.rfs
Mon Apr 19 10:09:28 2012
Tue Apr 20 15:16:56 2012