Implement offsets, Mplement, Ffsets – Ag Leader Integra Users Manual User Manual
Page 233
217
A
PPLICATION
L
IQU
ID
R
ATE
C
ONTROL
16. Enter Hitch Point Offsets
Press check box if implement provides a hitch point. Press
to enter distance and drop-down
menu to enter “to the left” or “to the right”. Press
to enter distance Forward or Backward. Press
to continue.
17. Enter Implement Name
Press
to enter a name for the implement. Press
to continue.
18. Select Implement.
Press
to continue.
19. Select Second Implement.
Use drop-down menu to select Implement or press
to add second implement.
20. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and configure Auxiliary Channel.
Press Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard.
21. Enter Configuration Name
A suggested name for the configuration appears. If desired, Press
to enter a different name.
Press
when complete.
The complete configuration should now appear under the Application heading located on the
Configuration tab of the Configuration Setup screen.
The Operating Configuration is now able to be selected when starting a new Field Operation with the
Field Operation Wizard. For more information, see
.
I
MPLEMENT
O
FFSETS
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button >Offsets button
Configuration
Select Your Specific
Configuration
Offsets