Create tillage configuration, Configuration setup, Tillage – Ag Leader Integra Users Manual User Manual
Page 165: Create tillage configuration configuration setup, Reate, Illage, Onfiguration, Etup
149
T
ILLAGE
T
ILLAGE
T
ILLAGE
C
REATE
T
ILLAGE
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Tillage button
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
to enter a new vehicle. Press
to
continue.
2. Select Implement
Select an implement from the drop-down list menu, or press
to create a new implement. Press
to continue.
3. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and Auxiliary Channel. Press
Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard.
4. Enter Configuration Name
A suggested name for the configuration appears. If desired, press
to enter a different name for
your configuration. Press
when complete.
Your Operating Configuration will then be viewable when you start a new Field Operation with the Field
Operation Wizard.
C
ONFIGURATION
S
ETUP
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > select
your specific configuration > Setup (wrench) button
Configuration
Tillage
Configuration
Select Your Specific
Configuration