Ag Leader Integra Users Manual - Manual (Page 345)

329
H
ARVEST
H
ARVEST
M
ONITORING
/M
APPING
The illustration at left shows how the display could track two
different varieties.
In this example, when the harvester reaches the end of Variety 1,
and the operator maneuvers the vehicle to Variety 2, a message
appears that either a new variety has been detected and the
operator is notified to change regions (Automatic Variety
Tracking,) or that a variety has been detected and the display is
automatically changing regions. (Automatic Region Changing).
Variety Tracking menu and Automatic Variety Tracking
• Press to enter your own name for a new region.
Automatic Variety Tracking
• If you want to enable the Automatic Variety Tracking feature, select only the Automatic Variety Tracking
check box. (Do not select the Automatic Region Changing check box).
Note: A variety map must be present to enable Automatic Variety Tracking.
• If no variety map is present, then you can either
- manually assign a variety from the Variety Tracking List, located to the right of the Automatic Variety
Tracking check box; or
- import a variety reference map. For more information, see “Importing Variety Maps” on page 330 .
Automatic Region Changing
If you wish to enable the Automatic Region Changing feature, select both the Automatic Variety Tracking
check box, and the Automatic Region Changing check box.
In-Field Messages
If you have selected either the Automatic Variety Tracking or Automatic Region Changing features, you
will see one of the following messages as you harvest your field.
• If you have selected Automatic Variety Tracking, a message will tell you that the display has detected a
different variety, and that you should manually change the region.
Options
Automatic Variety
Tracking
Automatic Region
Changing Clear Variety
Map
--NONE--
Variety Tracking
<1>