HP NetStorage 6000 - Manual (Page 133)

Integrating with Remote Backup Applications
Using ARCserveIT
11-2
Using ARCserveIT
ARCserveIT is a backup and restore management solution developed to
function across various platforms (ARCserveIT is a product of Computer
Associates International, Inc.). Check the manual that came with your
software to see what platforms your edition of ARCserveIT supports.
You can use ARCserveIT version 6.61 on either a Windows NT or UNIX
system connected to your HP NetStorage 6000.
Note When you back up with a remote server, you cannot use a tape device
local to the HP NetStorage 6000.
Using ARCserveIT for UNIX
Before you can backup with ARCserveIT, you must:
n mount on your local host machine the HP NetStorage 6000 volumes you
want to back up.
n configure the HP NetStorage 6000 so that the UNIX backup system is
set to a trusted host on the HP NetStorage 6000.
To back up files from the HP NetStorage 6000 using ARCserveIT for
UNIX:
1 Open a web browser and enter the host name of your ARCserveIT
backup system in the address field.
2 Click Backup.
3 Enter the ARCserveIT domain user name and password and click OK.
4 In the dialog box, select the default host, then click OK.
5 Click UNIX Agents, then select the ARCserveIT backup host where
your HP NetStorage 6000 volumes are mounted.
6 Select the Node Option tab, then click Misc. Check Traverse NFS
(UNIX Only).
7 Click your backup host to expand it.
8 Enter the user name and password of the backup host.
9 Select the HP NetStorage 6000 mount points you want to back up.
10 Select your backup options as you normally would, then start the
backup.