HP NetStorage 6000 - Manual (Page 121)

Integrating with Management Applications
HP OpenView Network Node Manager Integration
10-4
HP OpenView Network Node Manager Integration
Windows NT Installation
Note You need to be at the Windows NT server or workstation where HP
OpenView is installed.
To install HP OpenView NNM for Windows NT:
1 Make sure that Network Node Manager (NNM) Services has been
started.
2 Shut down the NNM graphical user interface program.
3 Insert the HP NetStorage 6000 CD into your CD-ROM drive.
4 Run the following program and follow the screen instructions. The
Finish dialog box appears when the installation is complete.
\Ovw\WinNT\setup.exe.
5 Start the NNM graphical user interface program. The HP NetStorage
6000 symbol and menu do not appear until NNM discovers it at the next
polling time.
You may see the following error appear when running the NNM program
the first time. This error should disappear in subsequent runs of NNM.
0:46:42 ovw (0xA82):
------------------------------
File: C:\OpenView\symbols\C\Server\Server_hpns6000
Line: 6
Error: Unknown field "isHPNS6000"
------------------------------
10:46:44 ovw (0xA82):
------------------------------
File: C:\OpenView\registration\C\hp_6k\hpns6Kapp
Line: 37
Error: Unknown field "isHPNS6000"
------------------------------
To uninstall the integration pack:
1 From the Windows control panel, select Add/Remove Programs.
2 Select the NNM-NetStorage 6000 Integration Pack, then click Add/
Remove.