HP NetStorage 6000 - Manual (Page 116)

Contacting Support and Upgrading
Upgrading the HP NetStorage 6000
9-5
7 After your system uploads the image to the HP NetStorage 6000, you
must reboot the device in order for the upgrade to take effect. You can
click either Reboot Now (if the reboot won’t interrupt the operation of
your network), then click Finish or you can select Reboot Later.
Upgrading From Downloaded File
If you already downloaded the file:
1 Using the NetStorage web interface, click the Support tab, then select
Upgrades > Start Upgrade Now.
2 Click It’s on my computer’s File System Already, then click Next.
For more information, see “Upgrading From Downloaded File” on
page 9-5.
3 A screen appears, asking you to specify where you downloaded the
upgrade file. Enter the path of the upgrade file or click Browse to locate
it.
4 Click Upload Image to NetStorage 6000.
5 After your system uploads the image to the HP NetStorage 6000, you
must reboot the device in order for the upgrade to take effect. You can
click either Reboot Now (if the reboot won't interrupt the operation of
your network), then click Finish or you can select Reboot Later.