Bsmi notice, Laser compliance – HP StorageWorks 500 Modular Smart Array User Manual
Page 88
Regulatory Compliance Notices
A-6
HP StorageWorks Modular Smart Array 500 System User Guide
BSMI Notice
Laser Compliance
The GBIC Module contains a laser diode of either gallium aluminum arsenide
(GaALAs) emitting in the wavelength range of 770 to 860 nm, or indium gallium
arsenide phosphide (InGaAsP) emitting in the wavelength range of 1270 to 1355 nm.
All HP systems equipped with a laser device comply with safety standards, including
International Electrotechnical Commission (IEC) 825. With specific regard to the
laser, the equipment complies with laser product performance standards set by
government agencies as a Class 1 laser product. The product does not emit hazardous
laser radiation.
WARNING:
Use of controls or adjustments or performance of procedures
other than those specified herein or in the laser product’s installation guide
may result in hazardous radiation exposure. To reduce the risk of exposure
to hazardous radiation:
•
Do not try to open the unit enclosure. No user-serviceable components are
inside.
•
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
•
Allow only HP Authorized Service technicians to repair.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States. This device is classified as a
Class 1 laser product as defined by IEC 825.