HP StorageWorks 500 Modular Smart Array - Manual (Page 132)

Display Messages
C-40 HP StorageWorks Modular Smart Array 500 System User Guide
Table C-1: Display Messages continued
Message Type Description Action
412 STORAGE BOX
# EMU NOT
RESPONDING Error The specified storage
enclosure is not
responding to
commands. 1. Be sure that the
storage box is powered
up.
2. Be sure that all cables
are connected securely.
3. Power down the
MSA500 system.
4. Power down the
storage box.
5. Power up the storage
box.
6. Power up the MSA500
system.
If this action does not solve
the problem, contact HP
support.
413 STORAGE BOX
# EMU VERSION
Informational Displays the version of
the firmware running on
the I/O EMU. This
display only applies the
internal I/O EMU of the
MSA500 system. The
controller does not
display versions for
externally connected
storage boxes. —
500 INITIALIZING
PCI SUBSYSTEM Informational The array controller PCI
subsystem is initializing
as part of the power up
sequence. —
continued