HP StorageWorks 500 Modular Smart Array - Manual (Page 36)

Installation and Operation
2-8 HP StorageWorks Modular Smart Array 500 System User Guide
IMPORTANT: Unless you are converting the rails for use in round-hole racks, do not
remove the pins from the ends of the rack rails. These load-bearing pins are designed to
fit through the holes without being removed.
NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet
metal.
2. Insert the front end of the left rack rail into the inside front of the rack. Be sure
that the pins extend through the holes marked during the rack template
procedure.
IMPORTANT: Be sure that the scissor-type locking latch engages when the end of the
rail seats into the rack uprights.