HP Surestore 6164 Switch - Manual (Page 74)

4-2 Web Tools User’s Guide
Switch View
4
The items and information available in Switch View
Port icons The letters in the Port icon indicate the GBIC (Gigabit Interface
Converter) type, as follows:
blank - No GBIC present
SW - Short wave GBIC
LW - Long wave GBIC
SWID - Short wave serial ID GBIC
LWID - Long wave serial ID GBIC
A yellow outline around a port icon indicates port failure. For
detailed port information, click the Port icon to see the Port
Information View.
Port numbers
(on the top of each port) The number of the port.
LED Status Indicators
(round light next to each
port)
The color indicates the status of the port.
No light - No device attached.
Steady yellow - Receiving light, but not online;
check cable connections.
Slowly flashing yellow - Disabled (diagnostics or
portDisable command).
Rapidly flashing yellow - Error, fault with port.
Steady green - Online (connected with device by
cable).
Slowly flashing green - Online but segmented (loopback
cable or incompatible switch).
Rapidly flashing green - Internal loopback (diagnostic)
Flickering green - Online and
transmitting/receiving frames.
Power supply Removable power assemblies are updated to show
presence/absence and status of each:
Green - Power supply present and operational.
Red X - Power supply present but not operational.
Cover plate - Power supply absent or not fully plugged in.
Status Click to view the switch’s health status.