HP Surestore 6164 Switch - Manual (Page 122)

4-50 Web Tools User’s Guide
Switch View
4
QuickLoop Tab
Use the QuickLoop tab to manage QuickLoop configuration. For information about managing the
features available when QuickLoop and Zoning are used together, see Zone Administration View in
this document. For detailed information about the QuickLoop feature, see the QuickLoop User’s
Guide.
The QuickLoop tab is shown in Figure 4-8.
OK Click to save the changes made to the tab and to exit the tab.
Apply Click to save the changes made to this tab and to stay in the current
tab. Additional changes can be made and the APPLY button pressed
when making changes incrementally.
Close Click to exit the current tab. If changes have been made but not
committed by clicking the APPLY button, a dialog box displays.
Reset Click to reset the tab to the last set of committed changes. If the
APPLY button has not been pressed on this tab, the parameters are
returned to the original values the tab had when it was initially
displayed.