Mirror – horizontal, Mirror – vertical, Mirror – horizontal • mirror – vertical – Brother PE-DESIGN Ver.432 User Manual
Page 99

89
Operation:
1
Select one or more outline data (Stage 3 only).
2
Click
Edit
, then
Delete
.
The selected outline data are removed from the screen. Since they are not saved in the clipboard,
the only way to make them reappear is to use
Edit – Undo
.
See also:
■
Mirror – Horizontal
Purpose:
Flips the selected data up/down.
Shortcut key:
+
Toolbar:
Operation:
1
Select one or more outline data (Stage 3 only).
2
Click
Edit
, then
Mirror
, then
Horizontal
.
A horizontal mirror image (top and bottom inverted) of the outline data appears on the screen.
Two successive executions of this command restores the original image.
See also:
“Flipping a pattern horizontally or vertically” on page 63 and “Mirror – Vertical”
below
■
Mirror – Vertical
Purpose:
Flips the selected data left/right.
Shortcut key:
+
Toolbar:
Operation:
1
Select one or more outline data (Stage 3 only).
2
Click
Edit
, then
Mirror
, then
Vertical
.
A vertical mirror image (left and right inverted) of the outline data appears on the screen.
Two successive executions of this command restores the original image.
See also:
“Flipping a pattern horizontally or vertically” on page 63 and “Mirror – Horizontal”
above
Ctrl
H
Ctrl
J